Shower pump: WMK24-13 24VDC 40W

The Head Spa shower pump WMK24-13 24V DC 40W is a hydraulic spare part intended for the water supply circuit of the shower on Head Spa mobile blocks compatible. It constitutes a replacement solution when the original pump has a confirmed failure and its electrical, hydraulic characteristics and connections correspond to those of this reference.

A circulation pump for the Head Spa shower

The shower allows you to carry out different stages of hair care, in particular wetting and rinsing the hair. On Head Spa equipment equipped with a shower circuit powered by a pump, this component helps convey water to the diffusion outlet.

The WMK24-13 40W pump is intended for compatible installations using this configuration. It allows you to replace a defective pump after identifying the problem and checking the characteristics of the original part.

Reference WMK24-13: 24V DC power supply and 40W power

This pump has the reference WMK24-13 and operates at a nominal voltage of 24 volts direct current, with an advertised power of 40 watts.

Power is an essential compatibility criterion. A 40W pump must not be replaced by a 20W version, or vice versa, without technical validation of the installation and its power supply.

The voltage, power, polarity and connector type must correspond to the characteristics provided by the manufacturer of your equipment.

An advertised flow rate of 16 liters per minute

The WMK24-13 shower pump has an indicated flow rate of 16 L/min, or 960 liters per hour in unit conversion.

This flow rate constitutes technical information allowing the replacement pump to be compared with the one already installed. The actual flow rate of the shower depends in particular on the configuration of the hydraulic circuit, pressure losses, connections and the condition of the pipes.

Height indication of 15 meters

The reference communicated presents an indication of 15 m. On circulation pumps, this data is generally associated with a discharge head characteristic, the exact interpretation of which must be confirmed in the manufacturer's documentation.

The maximum flow and head values ​​are not necessarily reached simultaneously. They must be considered as separate parameters during the technical comparison.

A pump intended for compatible Head Spa mobile blocks

This pump is intended for Head Spa mobile blocks equipped with a shower pump corresponding to the reference WMK24-13, with a 24V DC power supply, a power of 40W and suitable connectivity.

Depending on the generation and configuration of the block mobile, the headband pump and the hand shower pump may have different characteristics. It is therefore essential to precisely identify the function of the replaced pump.

Do not confuse the shower pump and the arch pump

Japan Head Spa offers two distinct configurations bearing the reference WMK24-13:

• Handle bar pump: WMK24-13, 24V DC, 20W, 10 m, 10 L/min.
• Shower pump: WMK24-13, 24V DC, 40W, 15 m, 16 L/min.

These two versions are not interchangeable by default. Despite a reference and a nominal voltage common, their powers and their hydraulic characteristics differ.

The connection socket and the connections must also be compared before any order.

Why replace a Head Spa shower pump?

Several symptoms can lead to checking the shower pump:

• No flow at the outlet of the shower shower head.
• Abnormally low water pressure.
• Irregular operation during rinsing.
• Unusual noises coming from the pump.
• Circulation stopped during a service.

These symptoms do not systematically prove a pump failure. A clogged filter, shampoo deposits, limescale, an obstruction in the shower head, an electrical problem or a water supply anomaly can also explain the reduction in flow.

A prior diagnosis is therefore recommended before replacement.

Japan Head Spa: your specialist in pumps and spare parts

Japan Head Spa supports the maintenance of professional hair care equipment thanks to a selection of pumps and replacement components adapted to the installations compatible.

Our range of shower pumps, arch pumps and spare parts Head Spa allows you to search for the different references necessary for the maintenance of your equipment.

To ensure a suitable choice, always compare the reference, power, voltage, hydraulic characteristics and connection socket of your original pump.

Product type	Head shower pump Spa
Reference	WMK24-13
Nominal voltage	24V DC
Current type	Direct current
Rated power	40W
Advertised flow rate	16 L/min
Converted flow rate	960 L/h
Height indication	15 m
Main function	Water supply to the Head Spa shower
Equipment concerned	Compatible Head Spa mobile block
Connection socket	Must be checked before ordering
Hydraulic connections	To compare with the pump original
Universal compatibility	No
Destination	Head Spa equipment maintenance
Installation	Professional intervention recommended
Packaging	1 shower pump (x1)
Price	€149.99 incl. VAT

Head Spa mobile blocks can use separate pumps to power the massage arm and the hand shower. The 20W and 40W WMK24-13 models should not be confused.

Attention: the power, flow and height differ. The two versions are not interchangeable by default. Always check the connection socket and the hydraulic connections.

Find the references available in our category Head Spa pumps and spare parts.

1. Identify the shower pump

Check that the pump to be replaced powers the shower of your Head Spa mobile unit and not the massage bar.

2. Check the reference WMK24-13

Locate the technical label of your pump and look for the reference WMK24-13. Also compare all the characteristics indicated on the original part.

3. Control power of 40W

This hand shower pump operates in 24V DC with a power of 40W. Do not confuse it with the 20W version intended for the headband.

4. Compare the connection socket

The shape of the connector, the number of contacts, the keying and the polarity must correspond to your installation. A different plug may prevent replacement, even with an identical part number.

5. Check the hydraulic connections

Compare the position of the water inlets and outlets, the dimensions of the connections and the fixing system of the pump in your mobile block.

Why does a Head Spa shower lose pressure?

A decrease in shower flow can be linked to several causes: defective pump, clogged filter, limescale deposits, accumulation of hair products, electrical power problem or obstruction in the hydraulic circuit.

Before replacing the pump, it is advisable to check the filters and accessible elements according to the manufacturer's recommendations. A functional pump may have reduced flow when part of the circuit is blocked.

Replacing the WMK24-13 shower pump

Replacement involves intervention on electrical and hydraulic connections. The Head Spa equipment must be stopped, disconnected from the mains and secured before any operation.

We recommend intervention by a qualified professional in order to check the compatibility of the pump, the polarity, the connections and the tightness of the circuit.

Do not modify the cables or the electrical outlet to adapt a pump whose compatibility has not been confirmed.

Maintain the shower circuit

Regular maintenance of the water supply system helps limit deposits that can reduce flow and disrupt pump operation.

Clean filters, showerhead and accessible components regularly in accordance with the manufacturer's recommendations. Avoid the accumulation of shampoo residue in the circuit.

Do not use aggressive cleaning products or descaling solutions that are not compatible with the components of your installation.

Japan Head Spa after-sales service

For any questions regarding the identification or replacement of a shower pump, our after-sales service can assist you in checking the references.

After-sales service email: sav.japanheadspa@gmail.com

Also discover our other replacement pumps for Head Spa to compare the available references.

What is the WMK24-13 Head Spa shower pump used for?

The WMK24-13 40W pump is intended to supply water to the shower of compatible Head Spa mobile units. It can be used as a replacement part when its characteristics match those of the original pump.

What are the characteristics of this hand shower pump?

The pump is marked WMK24-13, 24V DC, 40W, 15 m and 16 L/min. These values ​​must be compared with the information written on your old pump.

What is the difference between the WMK24-13 20W pump and the WMK24-13 40W?

The 20W version is intended for the hoop and has an advertised flow rate of 10 L/min and a height indication of 10 m. The 40W version is intended for the hand shower, with 16 L/min and 15 m. The two versions are not interchangeable by default.

Is the WMK24-13 40W pump compatible with all Head Spa mobile blocks?

No. Its compatibility depends on the mobile block model, the original reference, the power, the electrical outlet and the hydraulic connections.

Does the shower pump operate on 12V or 24V?

This pump operates under a nominal supply of 24V direct current, with an indicated power of 40W.

What is the flow rate of this pump? hand shower?

The announced flow rate is 16 liters per minute, or 960 liters per hour. The flow actually obtained depends on the configuration and state of the hydraulic circuit.

What does the 15 m indication mean?

The 15 m indication is generally associated with a discharge height characteristic. Its precise interpretation must be confirmed by the manufacturer's technical documentation.

Why does my Head Spa shower no longer have pressure?

A low flow rate can come from a defective pump, a clogged filter, an obstruction in the shower head, limescale deposits, shampoo residue or an electrical supply anomaly. It is recommended to investigate the cause before replacing the pump.

How do I know if my shower pump is defective?

A technical diagnosis allows you to check the power supply, the operation of the circuit and any obstructions. If the fault is confirmed, a compatible replacement pump can be installed.

Why should you check the connection socket ?

Pumps with the same reference may have different connectors. You must check the shape of the connector, the contacts, the keys and the polarity before any order.

Can a 40W shower pump be installed in place of a 20W headband pump?

This substitution must not be made without technical validation from the manufacturer. The electrical and hydraulic characteristics differ, even when the reference WMK24-13 is common.

Can this pump be plugged directly into a 230V socket?

No. This pump is designed for 24V DC power and should never be connected directly to the 230V mains.

Can you replace the Head Spa shower pump yourself?

We recommend professional intervention, as replacement requires checking the electrical connections, hydraulic tightness and compatibility of the part.

Where to buy a Head Spa shower pump?

Japan Head Spa offers a selection of Head Spa shower pumps and spare parts, including different part numbers for compatible equipment.

What is the price of the WMK24-13 40W pump?

The WMK24-13 24V DC shower pump 40W is available at a price of €149.99 including tax.

Is delivery free?

Delivery is free from €50 of purchase, depending on the applicable conditions.

How to contact Japan Head Spa to check compatibility?

Contact our after-sales service at the address sav.japanheadspa@gmail.com by attaching photographs of your current pump, its label and its connection socket.