Hoop pump: WMK24-13 24VDC 20W

The Head Spa circulation pump WMK24-13 24V DC 20W is a component intended for the hydraulic circuit of the massage hoop of compatible latest generation Head Spa mobile blocks. It constitutes a replacement part when the installed pump fails and its reference as well as its connections correspond to the WMK24-13.

A circulation pump for the Head Spa hoop

The massage arch is a characteristic element of the Head Spa treatment. It diffuses the water in the hair massage area and participates in the sensory experience offered during the services.

The WMK24-13 pump is involved in the circulation of water within compatible equipment. It can be used to replace the original pump when it is defective, subject to prior verification of all technical characteristics.

Reference WMK24-13: 24V DC power supply

This pump has the reference WMK24-13 and operates at a nominal voltage of 24 volts direct current, with a advertised power of 20 watts.

This electrical specification is essential when choosing a replacement pump. A pump powered by 24V DC should not be considered interchangeable with a 12V DC pump.

The voltage, polarity and connections must correspond to the characteristics of the original installation.

An advertised flow rate of 10 liters per minute

The WMK24-13 pump has a indicated flow rate of 10 L/min, or 600 liters per hour in unit conversion.

This flow rate constitutes reference data allowing the pump to be compared with the original component. The flow actually obtained at the level of the arch depends in particular on the hydraulic configuration, the delivery height, the pressure losses and the state of the water circuits.

Height indication of 10 meters

The technical reference communicated includes an indication of 10 m. On a circulation pump, this data is generally associated with a discharge height characteristic, the exact interpretation of which must be confirmed by the manufacturer's documentation.

The maximum flow and head values are not necessarily reached simultaneously.

Designed for the latest generation Head Spa mobile blocks

This pump is intended for the latest generation Head Spa installations equipped with a pump corresponding to the reference WMK24-13 and using compatible connectors.

Previous generations of mobile blocks may use other references, in particular pumps operating at a different voltage.

The generation of your device is not enough to confirm compatibility. Always check the information written directly on your pump before ordering.

The connection socket: an essential checkpoint

The electrical connector is a determining element of replacement. Even when the reference, voltage and power match, the pump may have different connections depending on its version.

Before purchasing, compare the shape of the plug, the number of contacts, their arrangement, any keying and electrical polarity.

Do not modify the connections to adapt a pump whose compatibility has not been established.

Identify a pump failure of hoop

Several symptoms may lead to examining the operation of the circulation pump:

• Absence of water diffusion at the level of the hoop.
• Flow rate has become abnormally low.
• Irregular water circulation.
• Unusual noises coming from the pump.
• Shutdown of the circulation system for a service.

These symptoms do not systematically mean that the pump is defective. A clogged filter, a clogged pipe, lack of water, an obstruction of the headband or an electrical anomaly can also be responsible.

Japan Head Spa: your specialist in pumps and spare parts

Japan Head Spa offers a selection of replacement parts intended for the maintenance of professional hair care equipment.

Our range of Head Spa circulation pumps allows you to find different references adapted to water circuits, massage hoops and compatible installations.

To replace a circulation pump, always favor the precise correspondence of the references and technical characteristics rather than a simple resemblance between two components.

Product type	Head Spa hoop circulation pump
Reference	WMK24-13
Nominal voltage	24V DC
Current type	Direct current
Rated power	20W
Indicated flow rate	10 L/min
Converted flow rate	600 L/h
Height indication	10 m
Main function	Water circulation towards the Head Spa hoop
Equipment concerned	Latest generation Head Spa mobile block compatible
Connection socket	To be checked absolutely
Hydraulic connections	To compare with the pump original
Universal compatibility	No
Use	Head Spa equipment maintenance
Installation	Professional intervention recommended
Packaging	1 replacement pump (x1)
Price	€149.99 incl. VAT

1. Identify the reference WMK24-13

Locate the technical label of the pump currently installed on your Head Spa mobile unit. Check that the reference indicated corresponds to WMK24-13.

2. Check the electrical voltage

The WMK24-13 pump operates under a nominal supply of 24V DC with a power of 20W.

Do not confuse it with the WMK12-13 operating at 12V DC. The two references should not be considered interchangeable.

3. Compare the connection socket

Examine the electrical connector of your original pump and compare its shape, contacts, keying and polarity with those of the replacement part.

Even with an identical reference, different connectors may prevent installation.

4. Check the hydraulic connections

Compare the position of the water inlets and outlets, the dimensions of the connections, the fixings and the size of the pump.

5. Confirm the generation of the mobile block

This reference is intended for compatible latest generation Head Spa mobile blocks. Older generations may use other pump models.

Check the circuit before replacing the pump

A low flow rate or absence of water in the arch can come from a defective pump, but also from an obstruction in the circuit, a clogged filter or a problem electrical.

Before replacing the pump, check the accessible elements in accordance with the instructions for your equipment. Shampoo residue, particles or deposits can disrupt water circulation.

Replacement of pump WMK24-13

The replacement concerns electrical and hydraulic components. The device must be completely stopped, disconnected from the mains and secured before any intervention.

Professional intervention is recommended in order to check the electrical compatibility, the connections, the polarity and the tightness of the connections.

Do not modify the cables, the plug or the connections to adapt a pump whose compatibility has not been confirmed.

Maintain the Head Spa circulation circuit

Regular maintenance of the hydraulic circuit helps to limit deposits likely to disrupt the circulation of water and the operation of the pump.

Respect the cleaning procedures specific to your equipment, in particular concerning the filters, the tank, the pipes and the accessible elements of the circuit.

Do not introduce chemicals, abrasives or descalers directly into the pump without confirmation of their compatibility by the manufacturer.

Japan Head Spa after-sales service

For a question regarding the reference, the electrical outlet or the compatibility of this pump with your Head Spa mobile block, contact our after-sales service.

After-sales service email: sav.japanheadspa@gmail.com

You can also consult our selection of Head Spa pumps and spare parts to identify another reference.

What is the Head WMK24-13 arch pump used for? Spa?

The WMK24-13 pump is intended for the circulation of water towards the hoop on compatible latest generation Head Spa mobile blocks.

What are the characteristics of the WMK24-13 pump?

The pump bears the indications WMK24-13, 24V DC, 20W, 10 m and 10 L/min. This information must be compared to the original pump before ordering.

What is the difference between WMK24-13 and WMK12-13?

The main difference confirmed is the nominal voltage: the WMK24-13 operates at 24V DC, while the WMK12-13 operates at 12V DC. They are therefore not interchangeable without technical validation.

Is the WMK24-13 pump compatible with all Head Spa mobile blocks?

No. It is only suitable for equipment compatible with this reference and its electrical, hydraulic and connection characteristics.

Does the WMK24-13 pump operate at 12V or 24V?

This reference operates under a nominal supply of 24 volts direct current, with an indicated power of 20 watts.

Why should you check the connection socket ?

Connectors may vary depending on version. It is essential to check the shape of the plug, the number of contacts and the polarity before replacing your pump.

What is the flow rate of the WMK24-13 pump?

The advertised value is 10 liters per minute, or 600 liters per hour. The actual flow rate depends on the hydraulic conditions of the installation.

What does the 10 m indication on the pump mean?

The 10 m indication is generally associated with a discharge height characteristic. Its precise interpretation must be confirmed by the manufacturer's technical documentation.

Why is the water no longer circulating in the hoop of my Head Spa?

A circulation problem can come from a faulty pump, a clogged filter, an obstruction in the hoop, a pipe or a fault in the electrical supply. It is recommended to check the cause before replacing the pump.

How do I know if my Head Spa pump is defective?

A technical check of the circuit and power supply helps determine if the malfunction is related to the pump or another component.

Can I replace the WMK24-13 pump myself?

Professional intervention is recommended, as the replacement involves electrical and hydraulic connections which must remain compatible and waterproof.

Can the WMK24-13 pump be plugged directly into a 230V socket?

No. This pump is designed for a 24V DC power supply. It should never be connected directly to the 230V mains.

Where to buy a replacement pump for Head Spa?

Japan Head Spa offers a range of Head Spa circulation pumps and spare parts allowing you to search for different references for compatible equipment.

What is the price of the WMK24-13 pump?

The circulation pump WMK24-13 is priced at €149.99 including tax.

Is delivery free?

Delivery is free from €50 of purchase, depending on the applicable conditions.

How do I contact Japan Head Spa to check my reference?

Contact our after-sales service at the address sav.japanheadspa@gmail.com by attaching photographs of your current pump, its label and its electrical outlet.