Hoop pump: WMK12-13 12VDC 20W

The Head Spa WMK12-13 12V DC 20W pump is a water circulation spare part intended for older generation Head Spa mobile blocks using this reference and compatible connectors. It is involved in the hydraulic circuit used to supply the water diffusion hoop used during hair care.

A circulation pump for the Head Spa hoop

The massage hoop is one of the characteristic elements of Head Spa equipment. Its operation is based on a circulation circuit allowing the water to be routed to the diffusion outlets provided by the manufacturer.

The WMK12-13 pump is intended to replace a corresponding circulation pump on compatible mobile blocks. It can in particular be sought during a maintenance operation following a water flow or circulation problem, after identification of the cause of the malfunction.

Reference WMK12-13: characteristics to check

This pump carries the following technical indications:

• Reference : WMK12-13.
• Nominal voltage: 12V DC.
• Power: 20W.
• Indication: 10 m.
• Indication of flow rate: 10 L/min.

This information is used to identify the replacement pump. Actual performance depends on hydraulic system conditions. The indications 10 m and 10 L/min should not be interpreted as performances necessarily obtained simultaneously.

A part for old generation Head Spa mobile block

This pump concerns old generation installations equipped with the corresponding reference. Head Spa equipment may be equipped with different pumps depending on their model, their year of manufacture and their technical configuration.

It is therefore essential to check the reference of the pump installed before ordering a new part. The mere presence of a massage bar does not guarantee the compatibility of the WMK12-13.

The connection socket: an essential element

Two pumps with a 12V DC power supply and a power of 20W may have different connectors. The shape of the socket, the number of contacts, their arrangement and the electrical polarity must be compatible with the original equipment.

Do not modify the connectors and do not directly connect a pump whose electrical compatibility has not been established. Inadequate installation can cause a malfunction or damage the components.

How to recognize a defective circulation pump ?

Certain symptoms may lead you to examine the Head Spa hoop pump:

• No water circulation in the hoop.
• Abnormally low water flow.
• Irregular operation of the circuit.
• Unusual noises coming from the pump.
• Circulation stopped during a service.

These symptoms alone do not prove a pump failure. A clogged filter, a blocked pipe, a power supply problem or an obstruction of the headband can also be the cause of the malfunction.

An offer of spare parts for Head Spa professionals

Japan Head Spa supports professionals in the maintenance of their hair care equipment and in the search for suitable replacement components.

Our selection of Head Spa circulation pumps and spare parts for roll bar allows you to find different references intended for the maintenance of professional equipment.

Whether you are looking for a WMK12-13 pump, a Head Spa roll bar pump or a circulation pump for mobile block, it is essential to compare the technical information of your installation before selecting your replacement part.

Product type	Head Spa circulation pump
Reference	WMK12-13
Nominal voltage	12V DC
Current type	Direct current
Rated power	20W
Indicated flow rate	10 L/min
Height indication	10 m (marked at compare)
Function	Water circulation towards the Head Spa hoop
Equipment concerned	Old generation Head Spa mobile block compatible
Connections	Must be compared with the original pump
Hydraulic connection	To be checked during installation existing
Universal compatibility	No
Use	Head Spa equipment maintenance
Installation	Professional intervention recommended
Packaging	1 replacement pump (x1)
Price	€149.99 incl. VAT

1. Check the reference: locate the technical label of your current pump and look for the reference WMK12-13. Also compare all the indications on this label.

2. Check the power supply: check that your old pump uses a 12V DC power supply and a power of 20W. A 12V pump should never be connected directly to a 230V mains socket.

3. Examine the connection socket: carefully compare the electrical plugs, contacts, keying and polarity. Different connections can make the pump incompatible despite a close reference.

4. Compare the water connections: check the position and dimensions of the water inlets and outlets, as well as the mounting of the pump in the mobile block.

5. Identify the generation of your Head Spa: the WMK12-13 pump presented here concerns compatible older generation mobile blocks. Newer versions may use other pumps.

Before replacing your Head Spa pump

A reduction in flow rate from the hoop may result from an obstruction in the circuit rather than a pump failure. Before ordering a replacement part, it is recommended to check the accessible filters, water level, hoses and hoop outlets according to the procedure provided for your equipment.

Hair product residue, deposits or particles present in the circuit can disrupt the circulation of the water and cause symptoms similar to a pump failure.

Replacing the pump WMK12-13

Replacement involves intervention on the hydraulic circuit and a low voltage power supply. The device must be completely stopped, disconnected from the mains and secured before any intervention.

We recommend entrusting the replacement to a qualified professional, capable of checking the electrical compatibility, polarity, hydraulic connections, sealing and proper functioning of the circuit after intervention.

Do not modify the cables, the connection socket or the electrical components in order to adapt a pump whose compatibility has not been established.

Preserve the circulation circuit

Regular maintenance of the circuit helps to limit deposits likely to reduce the flow rate or disrupt the operation of the pump. Follow the recommendations specific to your Head Spa equipment regarding water quality, filter cleaning and circuit maintenance.

Use only maintenance products compatible with the components of your installation. Do not introduce chemical solutions or abrasive products into the pump without authorization from the manufacturer.

After-sales service and parts identification

Japan Head Spa supports its professional customers with requests for identification and replacement of components. For help with a reference or compatibility, contact our after-sales service:

After-sales service email: sav.japanheadspa@gmail.com

You can also consult our selection of replacement pumps for Head Spa in order to compare the available references.

What is the WMK12-13 pump for on a Head Spa? ?

The WMK12-13 pump is a circulation pump for compatible Head Spa installations. It helps transport water to the scalp massage bar.

What are the characteristics of the WMK12-13 pump?

The pump is marked WMK12-13, 12V DC, 20W, 10 m and 10 L/min. These characteristics must be compared to those of the original pump before ordering.

Is the WMK12-13 pump compatible with all Head Spas?

No. This reference concerns compatible older generation Head Spa mobile blocks. The model of your device, connectors and connections must be checked before replacement.

Why should you check the pump connection socket?

Pumps with similar electrical characteristics may use different sockets. The connector, its layout and its polarity must match the existing installation.

Can a 12V DC Head Spa pump be connected directly to 230V?

No. This pump is identified for a nominal power supply of 12V direct current. It must never be connected directly to the 230V sector. The power supply and connections must be adapted to the pump.

What is the indicated flow rate for the WMK12-13 pump?

The indicated flow rate is 10 L/min. The actual flow rate in the hoop depends in particular on the configuration of the hydraulic circuit, the pressure losses and the condition of the components.

What does the 10 m indication on the pump mean?

The reference provided bears a marking of 10 m, generally associated with a discharge height characteristic on pumps. Its precise interpretation must be confirmed from the manufacturer's technical documentation.

Why is my Head Spa hoop no longer diffusing water correctly?

A low flow rate can come from a defective pump, but also from a clogged filter, an obstruction in the hoop, a power supply problem or a circuit anomaly. It is advisable to identify the cause before replacing the pump.

How do I know if I need to replace the pump of my Head Spa?

A technical diagnosis allows you to check if the malfunction really comes from the pump. If in doubt, contact our after-sales service, specifying the reference of your device and the symptoms observed.

Can you replace a Head Spa circulation pump yourself?

Replacement involves electrical and hydraulic connections. Professional intervention is recommended to guarantee the compatibility of the part, the tightness and the safety of the installation.

Is the pump suitable for recent Head Spa mobile blocks?

Not necessarily. Pumps may vary depending on generations and versions of equipment. Part number WMK12-13 and connections must match your original pump.

Where to buy a replacement pump for Head Spa?

Japan Head Spa offers pumps and spare parts for Head Spa equipment, including circulation part numbers for compatible installations.

What is the price of the WMK12-13 pump?

The WMK12-13 circulation pump for Head Spa is priced at €149.99 including VAT.

Is delivery of the pump free?

Delivery is free from 50 € of purchase, depending on the conditions applicable to the order.

How to contact Japan Head Spa to check a reference?

You can contact our after-sales service at the address sav.japanheadspa@gmail.com by attaching photos of your pump, its label and its connection socket.