Head Spa Consumables Pack | Filter, Gaskets and Plugs

The Consumables Pack for Head Spa mobile block is a set of spare parts intended for the maintenance and replacement of components used in the water circuits of compatible installations.

It brings together the elements necessary for different maintenance operations: closing the basin drains, replacing seals and maintaining the supply filtration system the Head Spa hoop.

Two plugs for the drains of the Head Spa basin

The pack includes two plugs intended for the drain openings located at the bottom of the Head Spa basin.

They allow the corresponding openings to be closed when the protocol and the operation of the installation requires it. Their shape and dimensions must correspond to the orifices of the basin to ensure suitable closure.

After the treatment, the openings which must be freed for the evacuation of water must be unblocked in accordance with the manufacturer's instructions.

Two small gaskets for sealing the connections

Les two small joints are intended for compatible hose or conduit connections.

They help ensure the tightness of assemblies and limit leaks at the connections concerned. The diameter, thickness and shape of the seal must correspond to the characteristics of the original connection.

When a seal is crushed, cracked or damaged, its replacement may be necessary to regain a correct seal.

A filter for the circulation circuit of the headband

The pack includes a filter for the Head rollbar circuit Spa.

This component participates in the mechanical filtration of the water circulating in the compatible system. It allows certain particles to be retained before they continue their circulation in the circuit.

The filter must be regularly maintained in order to limit the accumulation of residues likely to disrupt the circulation of the water.

A filter block for the Head Spa installation

The filter block is the box intended to accommodate the element filter of the arch circuit.

It constitutes part of the filtration system of the installation. Its shape and connections must correspond to the hydraulic circuit provided on the Head Spa mobile block.

The pack thus provides a replacement filter block and its filter element, subject to compatibility with the existing equipment.

A filter block gasket to preserve watertightness

Le block gasket filter completes the assembly by ensuring the sealing of the closure of the filter unit provided.

During assembly, the seal must be correctly positioned, without twisting or pinching, in order to limit the risk of leakage.

A damaged seal can compromise the sealing of the filter block and must be replaced by a part of suitable dimensions.

Maintenance essential daily filter block

To preserve the cleanliness of the circuit, the filter block must be cleaned every day after the last Head Spa service.

Remove the residue accumulated on the filter and in the housing according to the procedure applicable to your installation. After cleaning, allow the removable elements to dry in a clean and ventilated environment.

This drying helps to limit the stagnation of humidity and the appearance of bad odors in the filtration system.

Why replace the consumables of your Head Spa?

Over the course of services, certain components may wear out, become deformed or accumulate residue. Their replacement may be necessary in different situations:

• Missing or damaged basin cap.
• Hose seal worn or leaking.
• Filter damaged or difficult to clean.
• Cracked or damaged filter block.
• Filter block seal no longer allowing it to be closed waterproof.

The replacement must be carried out with parts corresponding to the dimensions and connections of the original installation.

A pack of spare parts for Head Spa professionals

This consumable pack is aimed at professionals equipped with a Head Spa mobile unit using a filtration system and compatible components.

It allows you to bring together several useful parts in a single order maintenance of the basin, the hydraulic circuit and the arch filtration system.

Discover our selection of Head Spa spare parts and consumables to complete your equipment and support its maintenance.

Product name	Head Spa Consumables Pack
Product type	Spare parts and maintenance kit
Equipment concerned	Compatible Head Spa mobile block
Total number of parts	7
Basin caps	2 caps (x2)
Small gaskets	2 seals (x2)
Filtered	1 filter (x1)
Filter block	1 filter housing (x1)
Filter block gasket	1 gasket (x1)
Location of plugs	Drain openings at the bottom of the basin
Function of small joints	Sealing of compatible hoses or conduits
Filter circuit	Water circuit of the Head Spa hoop
Filter block maintenance frequency	Daily, after treatment
Drying after cleaning	Yes, before reassembly if applicable
Dimensions of parts	To be confirmed
Universal compatibility	No confirmed
Packaging	1 complete pack (x1)
Price including tax	55,00 €

1. Identify your type of mobile block

This pack is intended for Head Spa mobile blocks with a hoop filtration system and compatible basin openings. Depending on the manufacturer and generation, the components may have different shapes.

2. Compare the sink caps

Check the shape, diameter and holding system of the current caps. The plugs provided must match the drain openings on the bottom of your Head Spa basin.

3. Check small joints

Joints intended for hoses or conduits must correspond to the diameter, thickness and shape of the original parts. An unsuitable seal can cause a leak.

4. Check the filter block

Compare your current filtration box with the filter block supplied: shape of the body, closing system, connections and general dimensions.

The compatibility of the filter and its box is essential to preserve the proper functioning of the hoop circuit.

5. Check the filter block gasket

Ensure that the gasket provided matches the sealing area of ​​the installed filter block. It must be able to be positioned correctly, without twisting or pinching.

Replacing the basin caps

Check the compatibility of the caps with the openings provided at the bottom of your Head Spa basin. Position them according to the operation of your installation.

At the end of the treatment, remove the plugs from the openings to allow the water to drain. Do not leave a drain necessary for the operation of the equipment blocked outside of the planned phase.

Replacing hose seals

Before any work on a conduit or hose, stop the water circuit and ensure that the system is no longer under pressure.

Only install a seal with compatible dimensions. Then check the absence of leaks when restarting the circuit.

Daily cleaning of the filter block

The filter block must be cleaned every day, after the last Head Spa service.

After stopping the system and in accordance with the instructions for your equipment, dismantle the accessible elements of the filtration system. Remove the residue accumulated on the filter and in the housing.

Rinse and clean the removable components with a product compatible with their materials. Do not use abrasive products or chemical solutions not authorized by the manufacturer.

Leave to dry to avoid bad odors

After cleaning, let the filter and the removable filter block dry in a clean and ventilated environment.

This step helps limit moisture stagnation and the appearance of bad odors linked to product residues capillaries.

Before the next use, reassemble the elements correctly and check the correct positioning of the seal as well as the tightness of the filter block.

When to replace the filter and the seals?

The replacement frequency depends on the condition of the components and the conditions of use. A damaged filter, a cracked housing or a seal which no longer fulfills its sealing function must be replaced by a compatible part.

Regular cleaning does not exempt you from checking the condition of the filter and its seal.

Japan Head Spa after-sales service

For any questions concerning the identification of this consumable pack or the compatibility of the parts, you can contact our after-sales service.

After-sales service email: sav.japanheadspa@gmail.com

Also find our selection of various spare parts for Head Spa.

What does the Head Spa Consumables Pack contain?

The pack includes 2 basin caps, 2 small seals, 1 filter, 1 filter block and 1 filter block gasket, i.e. 7 pieces in total.

What are Head Spa basin caps used for?

The caps are used to close the drain openings at the bottom of the basin when the protocol and configuration of the equipment require it.

What are the two small seals for?

They are intended to ensure the sealing of compatible hose or conduit connections on Head equipment Spa.

What is the function of the Head Spa filter?

The filter participates in the mechanical filtration of the water circulating in the circuit of the compatible Head Spa hoop, by retaining certain particles.

What is the Head Spa filter block used for?

The filter block is the housing intended to accommodate the filter of the hoop circulation circuit. It forms part of the installation's filtration system.

Is the filter block gasket included?

Yes, the pack includes a filter block gasket for the supplied filter housing.

Does the Head Spa filter need to be cleaned every day?

Yes. The filter block must be cleaned after each day of Head Spa services in order to remove residues accumulated in the system.

Why should the filter block be allowed to dry?

Drying the removable components after cleaning helps limit moisture stagnation and the development of bad odors.

Is the Consumables Pack compatible with all Head Spas ?

No, its universal compatibility is not confirmed. The caps, seals and components of the filtration system must correspond to the dimensions and configuration of your mobile block.

Is this pack suitable for Head Spa mobile blocks?

Yes, it is intended for Head Spa mobile blocks equipped with a hoop circuit and a filtration system compatible with the parts offered.

Can we replace only the filter ?

This product is sold in the form of a complete pack including the filter, the filter block, its gasket, two plugs and two small gaskets. It can be used to replace compatible components that require it.

When should the filter block gasket be replaced?

The gasket must be replaced when it is damaged, deformed or when it no longer properly seals the housing.

Why does my Head Spa filter unit give off a bad odor?

Stagnant water and the accumulation of hair product residue can promote bad smells smells. Daily cleaning followed by drying of the removable elements helps to limit this phenomenon.

How to check the compatibility of the pack?

Compare the shapes and dimensions of your current caps, seals, filter and filter block with the parts offered. If in doubt, contact our after-sales service with photographs of your original components.

Where to buy a Head Spa replacement filter and seals?

Japan Head Spa offers a selection of spare parts, filters, seals and consumables for Head Spa intended for compatible equipment.

What is the price of the Pack Head Spa consumables?

The complete pack of 7 pieces is priced at €55.00 including tax.

Is delivery free?

Delivery is free from 50 € of purchase, depending on the conditions applicable to the order.

How to contact Japan Head Spa to check the parts?

You can contact our after-sales service at the address sav.japanheadspa@gmail.com by attaching photographs of your caps, seals and filter block current.