Head Spa Hand Shower

The replacement Head Spa shower with gasket is a spare part intended for Head Spa mobile blocks equipped with a compatible connection. Designed to accompany professional hair care, it directs water towards the hair and scalp during the different stages of the ritual.

It includes a shower head equipped with resistant rigid pins, an integrated flow control and a threaded connection located at the base of the handle.

A hand shower suitable for Head Spa rituals

The shower accompanies the main stages of hair care: humidifying the hair hair, application and rinsing of shampoo, as well as rinsing of compatible care products.

Its design facilitates the orientation of the jet towards the desired areas while maintaining practical handling during services.

Resistant hard plastic pins

The shower head has resistant hard plastic pins, allowing to accompany scalp massage gestures during treatments.

Their design provides targeted contact. Unlike soft silicone pins, they require particularly delicate use in order to respect the sensitivity of the scalp.

The massage must be carried out without excessive pressure, adapting the movements to the comfort of the person.

A single jet for rinsing the hair

This hand shower has a single mode of jet, designed to accompany washing and rinsing hair during Head Spa services.

It does not include several spray programs. The adjustment accessible on the handle allows you to modulate the flow according to the possibilities of the hydraulic installation.

An ON/OFF button to adjust the water flow

The hand shower is equipped with a control marked ON/OFF. This control is involved in adjusting the flow of water and the pressure felt at the outlet of the shower.

Attention: the mention ON/OFF does not mean that the button controls the electrical switching on or off of the shower or its pump.

The operation of the circulation depends on the hydraulic and electrical configuration of the Head Spa mobile unit.

A white seal provided for connection

The shower is delivered with a white seal intended for the compatible connection.

This seal contributes to the sealing of the assembly between the hand shower and its hose when it is correctly installed on a suitable connection.

Before any assembly, check that the dimensions of the seal and the thread correspond to your installation.

A hose not included in the package

This product only includes the hand shower and its white seal.

The hand shower hose is not supplied. The part is intended to be connected to a hose already installed and compatible.

If your hose is also damaged, you should check the reference and dimensions of it separately before planning its replacement.

A spare part for Head Spa mobile block

This replacement hand shower is suitable for Head Spa mobile blocks with the corresponding connection and operating characteristics.

Depending on the manufacturer, model and year of design of the equipment, the hand showers may use different fittings and fixing systems.

It is therefore essential to compare the thread diameter, the shape of the fitting and the configuration of your hose before order.

Why replace a Head Spa hand shower?

Replacement may be necessary when the hand shower has any of the following problems:

• Damaged or deteriorated pins.
• Leak at the body of the shower.
• Damaged flow control.
• Defaulted diffusion head.
• Damaged threaded connection.
• General wear of the accessory.

A low flow rate does not, however, systematically mean that the shower head is defective. A weakened pump, a clogged filter, limescale or shampoo deposits can also disrupt water circulation.

Japan Head Spa: specialist in spare parts for Head Spa equipment

Japan Head Spa supports professionals in the maintenance of their hair care equipment thanks to a selection of replacement components.

Find our range of Head Spa spare parts for mobile blocks, showers and hair care equipment care in order to identify the components suitable for your installation.

To avoid any order errors, we recommend systematically comparing the connections and technical characteristics of the original part.

Product type	Replacement Head Spa shower
Main function	Hair washing and rinsing
Additional function	Scalp massage with pins
Jet type	Single jet
Pressure adjustment	Yes, by integrated control
ON/OFF button	Flow control, without electric ignition function
Material of the pins	Resistant hard plastic
Main color	White with chrome finish
Connection	Threaded connection at the base of the handle
Diameter of the connection	To be confirmed – measure before ordering
General dimensions	Not provided
Joint supplied	1 white gasket (x1)
Flexible supplied	No
Compatibility	Head Spa mobile blocks with suitable connection
Universal compatibility	No confirmed
Packaging	1 hand shower + 1 white seal
Price including tax	29,99 €

1. Check the shape of your current hand shower

Compare the shape of the hand shower, the handle, the diffusion head and the arrangement of the pins with your original accessory.

2. Check the threaded connection

The exact diameter of the connection of this hand shower remains to be confirmed. It is therefore essential to compare your current fitting and check the dimensions with after-sales service before purchasing.

Do not assume that a Head Spa shower fitting is always a standard size.

3. Check hose compatibility

This hand shower is sold without hose. Your existing hose must be able to connect correctly to the thread of the hand shower, with the seal provided when it is suitable.

4. Check the operation of the flow rate adjustment

The hand shower is equipped with an ON/OFF button involved in the flow rate adjustment. This button does not replace the electrical controls of the pump or the Head Spa mobile unit.

5. Identify your Head Spa equipment

Depending on the model and supplier of the mobile unit, the hand showers and hoses may differ. Compatibility must therefore be confirmed from the connection and not from the appearance of the equipment alone.

Preparation before replacement

Before replacing your Head Spa shower, stop the water circulation system and ensure that the circuit is no longer under pressure.

Check that the showerhead, seal and hose connection are free of defects likely to cause a leak.

Connecting the shower

Position the white seal in the intended connection, if its configuration corresponds to that of your hose. Then connect the shower without forcing the threads.

After assembly, put the circuit back into operation in accordance with the instructions for the mobile unit and check that there is no leak at the connection.

If the threads do not match, do not try to force them or modify the connection.

Adjusting the flow rate with the ON/OFF button

Use the integrated control to adjust the flow of water according to the possibilities of the system. This control allows you to modulate the flow rate and the pressure felt at the outlet of the shower.

It is not used to power on or electrically stop the pump. The operating controls of the mobile block remain independent.

Scalp massage

The resistant hard plastic pins allow you to delicately accompany the massage gestures during hair care.

Adapt the pressure and movements to the sensitivity of the person. Avoid excessive friction and do not use the bristles on an irritated or damaged scalp.

Cleaning the shower head

After use, rinse and clean accessible surfaces to limit the accumulation of shampoo, treatment residue and mineral deposits.

Use products compatible with plastic, finishing elements and the seal. Avoid abrasive products and solutions likely to damage the pins or the adjustment system.

What to do in the event of low flow?

If the shower has a low flow, it is advisable to check the condition of the water outlets, the hose, the accessible filters and the operation of the pump of the mobile unit.

Replacing the shower is not systematically necessary when the problem comes from a obstruction or a reduction in performance of the water supply circuit.

Japan Head Spa after-sales service

For a question concerning the connection or compatibility of this shower, you can contact our after-sales service.

After-sales service email: sav.japanheadspa@gmail.com

Also find our selection of spare parts for Head Spa equipment.

What is a Head Spa shower for?

The handshower accompanies wetting, washing and rinsing hair during Head Spa services. It also allows scalp massage gestures thanks to its nubs.

Is this hand shower sold with its flexible hose?

No. The product includes a hand shower and a white seal. The hose is not included in the package.

Is a seal included with the hand shower?

Yes, a white seal is provided with the hand shower for a compatible connection.

Are the pins made of soft silicone?

No. The pins of this hand shower are made of durable hard plastic. They must be used gently on the scalp.

Does the shower have several types of jets?

No, this shower has only one type of jet, with a flow adjustment system.

What is the ON/OFF button on the shower used for?

It allows you to control the flow of water and the flow rate. It is not used to electrically turn the pump or the shower on or off.

Can the water pressure be adjusted?

Yes, the shower has an integrated control allowing you to modulate the water flow and the pressure felt during use, within the limits of the hydraulic installation.

Is this shower compatible with all Head Spas ?

Universal compatibility is not confirmed. It is essential to check the diameter of the threaded connection and the connection of the hose before any order.

What is the diameter of the connection of this hand shower?

The exact diameter remains to be confirmed. We recommend comparing the dimensions of the connection of your current hand shower before purchasing and contacting our after-sales service if necessary.

Can this hand shower be used on a Head Spa mobile unit?

Yes, it is intended for Head Spa mobile units equipped with a compatible hose and connection.

Why does my Head Spa hand shower no longer have pressure ?

Low flow rate can be caused by limescale deposits, a clogged filter, shampoo residue, a hose obstruction or a pump malfunction. It is advisable to identify the cause before replacing the shower.

How to install a Head Spa replacement shower?

After stopping the water circulation, check the compatibility of the thread and the seal, connect the shower to the hose then check for leaks when restarting.

How to maintain a shower with pins ?

Clean the pins and water outlets regularly with a compatible product to limit the accumulation of care residue and limescale. Avoid abrasive products.

Where to buy a replacement shower head for Head Spa?

Japan Head Spa offers a selection of Head Spa spare parts and replacement accessories for compatible equipment.

What is the price of this Head Spa hand shower?

The Head Spa hand shower with white seal is priced at €29.99 including VAT, excluding flexible.

Is delivery free?

Delivery is free from 50 € of purchase, depending on the conditions applicable to the order.

How to contact after-sales service to check compatibility?

You can contact our after-sales service at the address sav.japanheadspa@gmail.com by attaching photographs of your current shower head and its connection.