Cabine en bois avec poêle et pierres de sauna traditionnel

Traditional sauna: operation, choice and installation

Summary: A traditional sauna heats the air in the cabin using a stove, often electric, and stones which store the heat. The water poured over these stones creates a puff of steam, without transforming the installation into a hammam. To choose a suitable cabin, examine together its volume, the stove, the power supply, the ventilation and the constraints of the place.

Are you hesitating between a stove cabin and an infrared sauna? The choice changes the way heat is produced and distributed. The traditional sauna first heats the air in the cabin, while the stove and its stones structure the ritual. To lay the foundations, check out the definition of a sauna.

But a cabin is not chosen on the sole promise of seat capacity. The power must correspond to the volume and characteristics of the walls. Power, ventilation, security and access also matter. An attractive model may not be suitable for a room if the heating or installation is not suitable. These checks are useful at home as well as in a professional wellness space.

How does the heat of a traditional sauna work?

A traditional cabin generally combines wooden benches, a stove and stones designed to withstand large temperature variations. The stove heats the ambient air and the stones store part of this heat. Pouring water over them releases a brief steam and temporarily increases humidity. To understand the role of these elements, consult our advice on stones suitable for sauna.

This alternation between hot air and occasional steam distinguishes the ritual from a steam bath with high humidity. It does not exempt you from correctly designing and maintaining the cabin. A Canadian sauna magazine, published in 2026, reminds us that risks depend in particular on design, use and maintenance. It highlights ventilation, humidity management, cleaning and clear instructions for users.

If you are hesitant, compare traditional sauna, infrared and hammam

Eau versée sur les pierres d’un poêle de sauna traditionnel

If you are comparing several cabins, first look at how each produces heat. A traditional sauna heats the air with a stove and stones. A infrared sauna uses emitters that transmit their heat directly to the body. The hammam has a very humid atmosphere, different from the generally drier heat of the Finnish sauna.

This equipment therefore does not provide the same sensation and is not prepared in the same way. The choice depends on your tolerance to heat, the desired atmosphere and the constraints of the premises. If your question relates specifically to electric heating, our page explains how an electric sauna works.

A small sauna or a glass cabin? Choose the stove according to the volume

A stove is chosen according to the heating volume, and not just the number of places displayed. Calculate the cabin's interior dimensions, then compare the result to the stove manufacturer's recommended volume range. Large glass surfaces and less insulating walls can also change heating needs.

An electric stove generally makes it easier to adjust the temperature. However, check its power, power supply and connection requirements before choosing a cabin. Electrical installation must comply with the manufacturer's instructions and be entrusted to a qualified professional when necessary.

A wood stove rather corresponds to a project where the space and installation make it possible to manage combustion and smoke evacuation. Safety distances, air supply and a suitable duct must be provided. In both cases, do not choose a power based on a general rule: consult the manufacturer's data for the cabin and stove in question.

Beyond the places, what criteria should you compare before purchasing?

A cabin advertised for several people does not guarantee that everyone will be able to lie down comfortably. Compare the interior dimensions, the length of the benches and the circulation around the stove. Also check that access to the location allows the elements to be transported and then assembled.

Construction matters too. Examine the thickness and composition of the walls, the insulation when indicated, the quality of the assemblies and the space occupied by the glass surfaces. For outdoor installation, check that the model is designed to withstand the climatic conditions of its location.

Safety deserves checking before purchasing, and not just at the time of the first session. An article published in 2026 in a Japanese scientific journal discusses the management of sauna safety from the point of view of operators, as detailed in this safety study. Consult the cabin and stove instructions, and ask for the necessary information on protection, ventilation and power supply.

Before the first session, prepare the installation and use

Checklist des vérifications avant d’installer un sauna

Before ordering, measure the location and check that the ground is stable and suitable. Anticipate the delivery route, door openings and the space required for assembly. For a home project, our article on how toinstall a sauna at home complete these preparation points.

  • Dimensions : measure the room and access points, then check the interior and exterior dimensions of the cabin.
  • Pan : Match its volume range to the cabin and follow the indicated safety distances.
  • Food : confirm the voltage and the required connection before work.
  • Ventilation : apply the instructions specific to the stove and the cabin, without improvising the location of the air inlets and outlets.

After use, follow the manufacturer's drying and cleaning instructions. For your comfort, start cautiously, go out if you feel unwell, and hydrate. If you have a medical condition or a question regarding your health, seek advice from a healthcare professional before using a sauna.

In collective establishments, some operators also combine the sauna with guided rituals. A preliminary survey by the Global Wellness Institute published in 2026 indicates that 43% of the 37 respondents already working integrated “Aufguss / sauna rituals” into their programming. This result concerns a small sample which does not represent the entire sector, as specified in the2026 preliminary investigation.

Things to remember before choosing

A well-adapted traditional sauna is based on a coherent whole: cabin volume, stove, materials, power supply and ventilation. Check the instructions and the constraints of the place before purchasing, then choose a model that corresponds to your actual use rather than just its advertised capacity.

Expand your professional well-being space

If your project combines heat and hair care, keep in mind that the sauna and the Head Spa are separate amenities. We equip salons, spas and institutes with professional equipment dedicated to scalp care and relaxation.

japan-headspa.com

Our Head Spa tables require a water connection, while our mobile blocks operate autonomously with a built-in 60 liter tank. This difference helps you consider the layout of your space before choosing. To explore solutions for professionals, visit our professional Head Spa equipment.

Frequently asked questions

What is the difference between a traditional sauna and an infrared sauna?

The traditional sauna heats the ambient air with a stove and stones. The infrared sauna uses emitters that directly heat the body.

Can you pour water on sauna stones?

In a sauna designed for this practice, a little water poured over the stones produces a puff of steam. Always follow the manufacturer's instructions and do not add water if the model does not allow it.

How to choose the power of the stove?

Calculate the interior volume and compare it to the stove manufacturer's recommendations. Also take into account glazing, insulation and power supply constraints.

Can a traditional sauna be installed outdoors?

Yes, provided you choose a cabin designed for this location and prepare a suitable support. Also check the needs of the stove and the instructions related to bad weather and safety.

Does Head Spa equipment replace a sauna?

No, these are separate pieces of equipment. To complete a hair care offer in a salon or spa, we offer connected Head Spa tables and free-standing mobile blocks.

Back to blog