Delivery of a Head Spa table: prepare your salon
Share
A Head Spa table can measure around 2.1 meters and weigh almost 120 kilograms. Its delivery is therefore not prepared like that of classic furniture. Before ordering, check access to the lounge, circulation in the cabin and the capacity of the room to accommodate the equipment. To compare the different formats available, consult our page head spa table.
The delivery of a Head Spa table also depends on your technical installation. A connected table generally requires a cold water inlet, a hot water inlet and a drain. The market reports published in 2026 also distinguish between fixed and mobile equipment according to their use, their location and their planning constraints, as shown a market report.
What to check before ordering a Head Spa table?
Imagine a table ready to go, but a door too narrow to get it in. This type of problem is detected before validation of the order. Start by measuring the cabin, doors, hallways, stairs and intended location.
Then check the chosen configuration. A connected table is intended for a fixed space with a suitable hydraulic installation. A mobile block responds to another logic, without fixed connection and with autonomous water management.
Before payment, prepare the following information:
- the useful dimensions of the cabin and access points;
- the presence of cold water, hot water and drainage;
- the electrical power available near the station;
- the full delivery address and any access constraints;
- the model, options and accessories desired;
- the billing information necessary for the order.
To explore the budget, options and technical constraints in more detail, our page dedicated to professional spa head table can help you frame your project.
After ordering, we will contact you again to validate the model, technical specifications and delivery information. This step is important to avoid shipping to an incomplete address or a configuration incompatible with your location.
Connected table or independent block: what transport should you plan?
The choice of transport depends first of all on the format of the equipment. A professional table measures around 2.1 meters and weighs almost 120 kilograms. It therefore requires a specialized carrier and precise preparation of the delivery point.
| Setup | Logistics characteristics | Preparation to plan |
|---|---|---|
| Connected table | About 2.1 meters and 120 kilograms | Wide access, unloading area and specialized service provider |
| Autonomous mobile block | Approximately 70 × 70 × 70 centimeters and 15 kilograms | Standard access, protected socket and filling area |
A mobile block is easier to move around in a multi-purpose space. It works with a built-in 60 liter tank and does not require a fixed connection to hot water, cold water or waste water.
This autonomy does not eliminate all organization. You must provide for the filling of clean water, emptying of waste water and access to filters. Transport is generally suitable for a medium-sized package, unlike that of a complete table.
If you are hesitating between several configurations, our guide to choose a head spa table brings the equipment closer to your space and your pace of care.
How to prepare access to the salon before delivery?
A living room can accommodate a large table without having a sufficiently clear path. So measure the width of the doors, the ceiling height and the angles of rotation. Also consider stairs, elevators and common hallways.
Mark the location of the table on the floor with marking tape. Add room for the stool, cart, towels and traffic around the customer. This simulation allows you to quickly spot obstacles.
The available surface must allow the professional to work behind the client's head. It must also facilitate cleaning, access to the shower head and handling of products. A sector report published in 2026 estimates that urban rooms of less than 9 m² can limit the installation of adjustable tables in 31% of the establishments studied. This data concerns the general market for spa tables, but it reminds us of the importance of realistic measurement.
For international delivery, provide a full address. Indicate the floor, the presence of an elevator, access times and parking constraints. This information helps the carrier organize unloading.
Unusual destination should be checked with our team before ordering. Conditions may vary depending on country, local access, administrative formalities and nature of transport.
What connections should be prepared before the table arrives?
A connected table does not connect like a simple piece of furniture. If no compatible tank is available, you must organize a cold water supply, a hot water supply and waste water disposal.
The position of the connections matters as much as their presence. The pipes must remain accessible for maintenance. The drainage must allow a regular flow without hindering movement around the table.
Also prepare an electrical outlet suitable for the functions of the model. It must remain accessible and protected from projections. Avoid multiple sockets placed on the ground in a damp area.
When the configuration of the premises is complex, seek the advice of a plumber and an electrician. They will be able to check the pressure, temperature, evacuation slope and circuit protection.
The customer organizes the connections necessary for using the table. We provide a detailed installation manual and answer installation-related questions. This assistance does not mean that the physical installation is carried out by our team.
A mobile block changes this organization. Its integrated 60 liter tank avoids fixed plumbing work. However, you must provide a convenient point to fill the clean water and empty the waste water.
How to track delivery and achieve successful reception?
On the day of delivery, clear the access area before the arrival of the carrier. Protect the ground and have someone available to check the external condition of the packaging.
After your order, we validate the technical information, delivery address and billing data. We then follow the announced processing and delivery steps.
The tables are transported by a specialized service provider. The mobile blocks follow a circuit adapted to medium-sized packages. Administrative and customs formalities as well as applicable taxes are covered according to the conditions of the destination.
Digital tools can make it easier to plan routes and inspections. However, reception, difficult access and exceptions remain operational steps. This principle also emerges from a Cognizant report published in 2026 on the evolution of activities related to transport and handling.
Upon receipt, check the packaging before opening. Note any impact marks and take photographs if necessary. Then check the presence of the elements provided for in the ordered configuration.
Before the first treatment, carry out a complete test. Control stability, flow, spray, water temperature, pump and integrated functions depending on the model.
The table table head spa Hikari displays a promotional price of €2,298.05 in 2026, but its sheet is indicated as out of stock. Therefore, check availability, delivery time and feasibility before organizing delivery.
For custom manufacturing, plan a specific exchange. The Hikari table indicates an average markup of 30% for this type of request. This data concerns this model and should not be automatically applied to other references.
Prepare delivery to avoid unforeseen events
A successful delivery begins with measuring the room, checking access and preparing the connections. A connected table is suitable for an already equipped fixed cabin, while a stand-alone unit is better suited to spaces without permanent plumbing. Before ordering, confirm the model, dimensions, weight, transportation conditions and formalities related to your destination. This method helps you receive the equipment in good conditions and begin your care without hasty adaptation.
Prepare your Head Spa equipment
Your project depends on the configuration of the premises, the volume of care and the level of autonomy sought. We can help you compare a connected table, mobile block or custom configuration before validating the technical information.

Check out our head spa tables to compare the available models, their functions and their delivery conditions. After ordering, we check the specifications, address and necessary information upon receipt.
Frequently asked questions
Is a Head Spa table delivered directly to the salon?
Delivery is organized with a service provider adapted to the weight and dimensions of the table. However, you must check access, times and specific constraints of the premises before shipping.
Who prepares the connections before delivery?
The customer organizes the necessary connections in his space. A plumber can check the cold water, hot water and drain, while an electrician can check the outlet and circuit protection.
What is the difference between a connected table and a mobile block?
The connected table works with a fixed installation and is suitable for a dedicated cabin. The mobile block uses an integrated tank and responds to spaces without a permanent connection.
Are all international destinations possible?
Unusual destinations should be checked with our team before ordering. Conditions of transport, customs clearance and taxation may depend on the country and the address indicated.
What should I check upon receipt?
Check the condition of the packaging, possible damage and the accessories provided. Then carry out a functional test before welcoming your first customer.