Installing a Head Spa tub: a practical guide for your salon

Can your premises accommodate a Head Spa bath without unforeseen work, inconvenience for the practitioner, or discomfort for your clients? Before ordering, you must check the dimensions, access points, plumbing, electrical wiring, and maintenance procedures. To help you plan your project, consult [link to relevant documentation]. our guide to installing a Head Spa in a salon or spa.

The Head Spa has spread in France as a service combining hair care, scalp massage, and relaxation. CNAIB This practice is presented as a recent development in beauty and wellness services. Your installation must therefore meet two requirements: ensure smooth technical operation and create an environment conducive to relaxation.

Is your premises ready for the installation of a Head Spa tub?

Start by measuring the actual space, not the theoretical area of the treatment room. You must factor in the equipment, the client lying down, the practitioner, movement, and the door opening. A well-placed tray should not obstruct passage, storage furniture, or access to an electrical outlet.

Mark the floor with masking tape to outline the equipment's footprint. Add the length of the table if you're using a separate tray, and then leave some space behind the client's head. This method allows you to quickly identify narrow passages and uncomfortable positions.

Also check the working height. The practitioner must be able to access the scalp without having to raise their shoulders or bend over for extended periods. Beauty professions, in particular, expose workers to awkward postures, repetitive movements, and crowded spaces, according to recommendations published by Health Insurance.

The presence of a nearby water source is not always enough. You must check the distance between the equipment and the water supply, the drainage path, the available electrical power, and the possibility of accessing the area behind or under the tank. Ensure technical access for maintenance operations.

Connected tank or self-contained unit, which configuration to choose?

The choice depends primarily on your premises and your pace of activity. One tank with connection It is installed in a fixed location. It generally requires a cold water supply, a hot water supply, and a wastewater drain. In return, you avoid the manual filling and emptying of tanks.

A self-contained model operates on a different principle. It functions with an integrated tank and can be moved to suit your booth layout. This solution is ideal for shared spaces, lounges that want to keep their existing table, and premises where plumbing work is not feasible.

To compare dimensions, features, and usage constraints, consult our guide to choosing a Head Spa tub for your salonThis will allow you to link your choice to your volume of care, the configuration of your room and your investment capacity.

In our range, the connected tables are better suited to dedicated installations. The mobile units, on the other hand, incorporate a large-capacity tank and meet the need for flexibility. Above all, you should avoid choosing mobile equipment for intensive use without verifying its actual autonomy, or a fixed model for a cabin that you regularly reconfigure.

How to organize the workstation to protect your ergonomics?

Imagine a complete session, from the initial welcome to the final cleanup. The client must be able to lie down and get up without any obstruction. You must be able to reach the showerhead, controls, products, and towels without constantly leaving your work position.

Place the accessories used for each treatment in the most accessible area. Occasional products can remain on a cart or side shelf. This organization reduces unnecessary twisting, movement, and interruptions during the procedure.

Neck comfort deserves special attention. The shape of the basin, the cushion, the head tilt, and the shoulder position directly influence the perceived quality of the treatment. Test several positions before opening, with a person of a different height if your team serves a diverse clientele.

Also provide a dry area for the client's personal belongings. Electrical cables must be kept away from water splashes. The floor must be stable, easy to clean, and clear enough to prevent falls.

What connections need to be made before delivery?

For a fixed installation, have the plumbing system checked by a plumber before receiving the equipment. Ask them to verify the pipe diameter, available pressure, water temperature, and drainage slope. An improperly sized drain can slow drainage or cause backflow.

You must also identify the location of the shut-off valves. These allow you to quickly cut off the water supply in case of a leak or maintenance. If the tank is far from the technical wall, protect the pipes and avoid improvised extensions that complicate maintenance.

To find out which equipment is available for your project, you can consult our range of Head Spa tubsWe distinguish between configurations with connections, mobile solutions and complementary equipment, so that you can select a coherent package.

Electricity must be checked with the same rigor. Verify the proximity of a suitable outlet, the required power, and the circuit protection. Never place a power strip on the floor in an area exposed to splashes. If in doubt, consult a qualified electrician before use.

How to integrate hygiene into your facility?

Maintenance should not be added after the installation. It should guide the choice of tank, the positioning of equipment, and access to surfaces to be cleaned. You must be able to wipe the tank, reach the nozzles, check the filters, and treat wet areas without dismantling the entire unit.

The standard NF X 50-843 presented by AFNOR This guide covers equipment installation, maintenance, facility inspections, and water management in wellness spas. It provides a useful framework for structuring your procedures, without replacing the regulatory requirements applicable to your establishment.

After each service, clean all surfaces that come into contact with the client. Check the shower head, the tub, the neck rest, and all accessories. Depending on your protocol, you must also rinse the circuits and follow the manufacturer's instructions regarding cleaning products.

Finally, keep a simple log. Record cleaning operations, anomalies, technical interventions, and consumable replacements. This traceability helps your team maintain consistent quality and react more quickly to any problems.

How to test the equipment before the first treatment?

Don't schedule your first service immediately after delivery. Allow time for testing, even if the installation seems simple. Tests should replicate normal operating conditions, with water, accessories, and the client's actual position.

1. Check the stability of the furniture and ensure there is no movement when the customer sits down.
2. Check the water supply, temperature, pressure and flow.
3. Test the shower head, jets, misting function and controls available on your model.
4. Observe the fittings for several minutes to detect a slow leak.
5. Perform a thorough cleaning, then check that the surfaces are drying properly.

Next, conduct a trial run with a member of your team. Ask them to comment on the height, access to the controls, neck comfort, and the duration of the procedure. This repetition often reveals details that are not visible during a simple technical check.

If you are using an existing table, check the alignment between the client's head and the tray. A slight misalignment can create neck strain or cause spillage. Adjust the positioning before receiving your first client.

How to plan your career path in 2026?

By 2026, installing a Head Spa tub should be considered a service project, not simply the purchase of a piece of furniture. You must factor in the equipment, any necessary construction work, cabin preparation, products, cleaning time, and staff training.

The new NAF 2025 classification, published by INSEE on September 4, 2026, identifies a sub-class dedicated to spa, sauna, and steam room activities. This classification is for statistical purposes only; it does not replace your administrative procedures, but it confirms the inclusion of spa activities within a clearly defined economic framework.

Before setting your rates, calculate the total time required for a session. Add the time spent greeting the client, preparing them, the treatment itself, cleaning up, and disinfecting. This will give you a more realistic view of your daily capacity and your break-even point.

If you do not have a fixed water source, consider a self-contained system before undertaking any work. Our Head Spa tub solution without any connection It may be suitable for a multi-purpose cabin or a space that needs to remain easily reconfigurable.

Finally, formalize an internal procedure. It should specify the preparation of the workstation, the welcome, the settings, the cleaning, the water management, and the reporting of any problems. A clear procedure facilitates the integration of a new practitioner and reduces variations in quality between sessions.

Take action with Japan Head Spa

You have defined your space, but you are still hesitating between a fixed table, a mobile unit or a standalone solution? We can help you bring your technical configuration closer to your professional objectives, whether it is a hair salon, an institute, a spa or a multi-purpose cabin.

Explore our professional equipment and compare the available formats to prepare your installation under optimal conditions. See our selection of Head Spa shampoo basin in order to identify the solution that corresponds to your space, your connections and your daily organization.