How does a head spa table work? Practical guide

How does a head spa table work? To understand this, you must simultaneously look at the furniture, the water circuit and the treatment protocol. A professional table does not only serve as a comfortable support. It combines a washing area, processing equipment and an ergonomic workspace. To deepen the operation of a head spa table, it is therefore necessary to distinguish each element.

The principle remains simple: the client lies down, their head is positioned near the pelvis or arch, then the professional carries out the different stages of the treatment. The head spa combines hair care, relaxation and technical procedures. This service has developed in French salons and institutes, as documented the French press.

How does a connected Head Spa table work?

Imagine a table installed in a professional cabin, near a water point. The client sits in a lying position. The neck rests on a cushion or an area provided for this purpose, while the basin accommodates the water used during the treatment.

A Head Spa table connected receives water through a dedicated power supply. Cold water and hot water generally arrive through two separate pipes. A mixer tap or a control system then makes it possible to obtain a temperature adapted to the customer's comfort.

The water can supply a hand shower, a sink, a washing arch or jets depending on the configuration. After rinsing, it joins the wastewater evacuation. The operation therefore resembles that of a hairdressing unit, with a design adapted to a longer and more immersive service.

The difference comes from usage. The classic tray mainly accompanies the shampoo. The Head Spa table must also allow a prolonged massage, comfortable head support and the application of specific treatments. Access around the client must remain clear to facilitate the professional's actions.

What happens during the treatment?

A session generally begins with the client settling in and observing their scalp. The professional then adapts the products, the water pressure and the gestures to the condition of the hair and skin.

Washing prepares the scalp. The spray removes residue and allows precise control of rinsing. The massage can then combine circular movements, gentle pressure and work on the neck or temples.

Depending on the protocol, an exfoliation, a mask or a targeted treatment can be added. Steam or fumigation then intervenes to create an enveloping atmosphere and support the treatment phase. These functions do not replace professional gestures. They complete the experiment when they correspond to the model and protocol chosen.

The sequence of steps depends on the service offered. To organize the treatment with more precision, consult our protocol for using the head spa. It helps connect diagnosis, washing, massage, treatment and finishing.

Which components really make the difference?

Two tables can have a similar appearance, while offering different configurations. It is therefore necessary to examine the components actually included, rather than relying solely on the design.

The first element is the washing basin. It must allow the head to be positioned correctly and avoid cervical tension. The neck rest cushion directly contributes to cervical comfort, especially when the session lasts a long time.

The second element is the washing arch. It can distribute water above the scalp and create a waterfall effect. Some models also have jets or a dedicated pump. These functions must be assigned to the model concerned, as they are not systematic across an entire range.

Fumigation, steam and light therapy can then enrich the protocol. They are mainly used to create a sensory experience and to accompany certain treatments. Their presence, power and control mode vary depending on the equipment.

The table head spa Hikari illustrates a complete configuration with a mattress, a rotating arch with water jets, a ceramic sink, a fumigation system, LED lighting, a hand shower, a stool, a control panel and a heating and filtering water pump. This product sheet is currently marked as out of stock. Its characteristics should not be generalized to all models.

What installations should be planned before commissioning?

Before ordering, first check the plumbing available in your premises. In the absence of a compatible tray, a connected table requires a cold water inlet, a hot water inlet and waste water evacuation.

The slope and position of the drain must allow regular flow. The hoses must remain accessible for maintenance, without obstructing circulation around the table. A poorly positioned installation can complicate cleaning and slow down each service.

The size of the position also deserves precise measurement. Professional tables can reach around 2.1 meters and weigh almost 120 kilograms. Therefore, provide suitable passage, delivery access and sufficient area to work on each side.

Ergonomics also concerns the professional. Consistent working height, clear access and good product organization reduce repeated twisting. The risks linked to repetitive postures and gestures are documented in the resources of INRS for hairdressers.

Finally, provide a power supply suitable for the integrated functions. The power required depends on the model, pump, heater and additional equipment. These points must be confirmed in the technical data sheet before installation.

Connected table or independent mobile block?

The choice depends mainly on your premises and your work pace. A connected table favors continuity of care. A autonomous mobile block favors installation flexibility.

The mobile blocks in our range work with an integrated 60 liter tank. They do not require a fixed connection to hot water, cold water or waste water. This solution may be suitable when you want to test the service without immediately initiating work.

How to choose and secure your installation?

Start by defining the protocol you actually want to offer. A session focused on washing and massage does not necessarily require the same functions as a ritual integrating steam, fumigation, jets and light therapy.

Then assess your surroundings. Measure the available length, side clearances and distance to water inlets. Also check the possibility of bringing a heavy table into the room, particularly through doors, corridors and stairs.

Request a complete technical sheet. It must specify the dimensions, weight, accessories included, connections, electrical power and maintenance conditions. A feature presented in a collection does not necessarily mean that it is included on every reference.

To compare the connected configurations suitable for equipped living rooms, you can consult our head spa table with connection. We can also review specifications after ordering to verify model, configuration and delivery information.

Finally, check the documents associated with the equipment. For the affected products marketed in the European Union, information relating to CE marking must be consistent with the material provided. The warranty, available parts and after-sales service terms also count in professional use.

A successful installation depends as much on the material as on the daily organization. Plan for towels, cleaning the pool, disinfecting surfaces and access to controls. Japan Head Spa provides a detailed installation manual and supports installation-related questions.

Choose a configuration adapted to your living room

Your choice must correspond to the actual configuration of your cabin, your appointment schedule and the desired level of comfort. A connected table is suitable for a prepared space, while stand-alone equipment meets other installation constraints.

We support you in choosing professional equipment, checking specifications and preparing your installation. Check out our head spa tables to compare the available configurations and identify which one corresponds to your project.