Choosing a Head Spa tray with reservoir for your living room
Share
Does your care area not have plumbing nearby? A bac head spa with tank can facilitate the development of an independent station, provided that the circulation of the water and its evacuation are provided. To compare this configuration with other installations, consult our Head Spa block with integrated tank.
The right choice depends less on a displayed capacity than on your schedule of appointments and the organization of the premises. You must distinguish clean water from used water, check the electrical needs of the model and verify that its use is authorized in your region. These points are particularly important for a professional salon.
Why choose a stand-alone Head Spa tray?
Imagine a rented cabin, a refurbished treatment room or a station that must remain mobile. A self-contained block avoids immediately creating a fixed hot water inlet, cold water inlet and drain. It thus brings flexibility to the layout, but does not eliminate daily tasks related to water.
Before purchasing, ask where clean water is stored, how used water is collected and how to empty each compartment. Also check for the presence of a pump, heater and necessary outlet. “Without connection” does not necessarily mean “without electricity”.
If your premises does not have a suitable water point, compare the options described on our page on the bac Head Spa without connection. A connected Head Spa table meets another configuration: it requires the water inlets and drainage required for its installation.
What capacity should you plan for depending on your treatment schedule?
A professional who performs several treatments in a row does not have the same needs as a salon occasionally offering a Head Spa. Estimate the number of appointments between two fillings, then ask the seller the actual usable capacity for clean water and, if the model has one, that of the waste water tank. These volumes are not necessarily identical.
On the Head Spa Block: Hana (Refurbished) sheet, the 58 liter cumulus is presented as allowing approximately 4 to 5 treatments. This indication concerns this specific model, and not all stand-alone bins. The sheet also specifies that the equipment is reconditioned, sold as is, without return or exchange, with a one-year warranty.
Local obligations can also influence the choice. In Kentucky, a procedure adopted on June 8, 2026 provides, for certain services without transformative chemicals, separate requirements for clean water and waste water from portable stations. These rules are specific to this state and show why you should check the criteria applicable to your business before ordering, rather than choosing solely based on tank volume. Consult the Kentucky procedure.
So do not take commercial capacity as a universal guarantee of performance. The type of treatment, the duration of rinsing and the manufacturer's instructions influence consumption. For an establishment with high attendance, ask for an estimate linked to your protocol and plan a clear organization of filling and emptying.
Is the absence of a connection enough to exercise?
Not always: the rules depend on the location and the services provided. In Ohio, a rule that came into effect on February 21, 2019 requires, among other things, a hot and cold water supply as well as suitable plumbing in salons and barbershops. This local requirement should not be interpreted as a universal rule, but it serves as a reminder that an autonomous device does not automatically replace the obligations imposed on the establishment. The Ohio rule also specifies that wastewater must be disposed of in a sanitary manner.
Before retaining mobile equipment, contact your local authority having jurisdiction or professional organization. Describe precisely the service offered, the type of products used and the way in which the waste water will be collected and then evacuated. Keep their response with the installation documents for your station.
This verification is particularly useful if your salon also provides services involving chemicals. The conditions of use of a portable station may differ depending on these services. Local validation before purchase avoids discovering after installation that a connected water point is still required.
How to organize space, drainage and maintenance?
In a small cabin, measure the space available taking into account the circulation around the tank and the access necessary to fill and clean it. Also check the dimensions of the treatment table and the position of the client's head. For a separate block, the height and alignment with the table are as important as the floor space.
Provide a practical location for clean water and wastewater collection, without obstructing passage. Surfaces and components in contact with water must remain accessible for cleaning. After each treatment, follow the manufacturer's instructions to empty, clean and maintain the circuits and tanks.
For a connected solution, the installation needs are different. In Texas, the inspection guide consulted in 2026 recalls that the establishments concerned must have plumbing providing hot and cold water and suitable drainage in work areas. Check the requirements applicable to your address and business in the Texas inspection guide.
If you need to plan for a plumbed installation, our page explains the steps for installing a Head Spa pan. If your priority is to avoid fixed connections, also consult the information on the head spa tray without plumbing and compare the instructions specific to the model considered.
The right tray depends on your space and your activity
A freestanding Head Spa tray is especially suitable when fixed plumbing complicates the layout, but the choice must take into account useful capacity, waste water collection, electrical supply and local rules. Check these points with the manufacturer and the competent authority, then compare them with your number of treatments and the actual dimensions of the cabin.
Equip your Head Spa space according to its constraints
Autonomous equipment can facilitate the layout of a station when fixed connections are not available. However, the capacity, power supply and water management remain to be verified for each reference. Also remember to measure your space and your table before choosing a configuration.

In our store, we offer Head Spa equipment intended for salons, institutes and wellness areas. Consult the sheet for the Head Spa block with tank, then compare its characteristics to your location and local requirements. If a technical point remains uncertain, contact our team before finalizing your choice.
Frequently asked questions
Does a Head Spa tub with reservoir work without plumbing?
A stand-alone model is designed to avoid fixed water and drain connections. However, check how the model manages waste water and whether it requires an electrical outlet.
How do I know if the capacity of the tank will suit me?
Estimate the number of treatments carried out between two fillings and ask for the usable capacity for each water circuit. The capacity announced for one model does not allow that of another to be deduced.
Is equipment without connection authorized in all salons?
No, requirements vary depending on the territory, services and products used. Check with your local authority before purchasing.
What dimensions should you check before ordering?
Measure the floor space, traffic routes and height of your treatment table. Also check the alignment of the sink with the customer's position.
What to check for a reconditioned model?
Review the condition, items replaced, warranty and return conditions before ordering. In our range, the sheet for the reconditioned Hana model indicates sale as is without return or exchange.